Figure 10
1.
Flange locknut (5/16 inch)
3.
Drain-valve bracket
2.
Fender strap
4.
Carriage bolt (5/16 x 1-1/4
inches)
3.
Assemble the valve bracket, fender strap, mud flap, and
fender (
) with the 2 carriage bolts (5/16 x
1-1/4 inches) and 2 flange locknuts (5/16 inch).
4.
Torque the carriage bolts and flange locknuts to 1978
to 2542 N∙m (175 to 225 in-lb).
7
Moving the Drain Valve
Parts needed for this procedure:
2
Flange nut (5/16 inch)
2
Flange-head bolts (5/16 x 1 inch)
Procedure
1.
Remove the lynch pin that secures the drain valve to
the sprayer-pump bracket (
).
Figure 11
1.
Lynch pin
3.
Drain valve
2.
Sprayer-pump bracket
2.
Move the drain valve between the left, rear fender and
the sprayer pump (
6
Summary of Contents for 316000001
Page 9: ...Notes ...
Page 10: ...Notes ...