Form No. 3402-104 Rev B
LED Work Light Kit
2015 and After—Cab and 2 Post ROPS Extension Kit
Model No. 31596
Installation Instructions
Note:
Determine the left and right sides of the machine from the normal operating position.
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
1
No parts required
–
Prepare the machine before installation.
Light assembly
4
Left mount (2 post ROPS extension)
1
Right mount (2 post ROPS extension)
1
Rear mount (2 post ROPS extension)
2
Cab mount
4
Carriage bolt (5/16 x 3/4 inch)
4
Flange nut (5/16)
4
Bolt (1/4 x 7/8 inch)
4
Flange nut (1/4 inch)
4
Bolt (6 mm x 20 mm)
4
Wire harness with grommet (cab)
4
Switch
1
2
Switch decal (2 post ROPS extension)
1
Install the lights.
© 2020—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3402-104* B
Summary of Contents for 31596
Page 7: ...Notes...
Page 8: ......
