Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
1
Petroleum jelly (not supplied)
A/R
Connect the battery
Debris blower assembly
1
Hitch
1
Bolt (3/8 x 3 inches)
2
2
Flange nut (3/8 inch)
2
Mount the hitch to the debris blower
3
No parts required
–
Connect the debris blower to the tow
vehicle
Handheld remote
1
AAA batteries
4
4
Screws, small
6
Assemble the handheld remote.
Media and Additional Parts
Description
Qty.
Use
Parts Catalog
1
Operator's Manual
1
Read before operating.
Engine Manual
1
Use to reference the engine operation and maintenance.
Operator Training Material
1
View before operating the machine.
Remote control
1
Use to remotely operate the blower.
Note:
Determine the left and right sides of the machine
from the normal operating position.
1
Connecting the Battery
Parts needed for this procedure:
A/R
Petroleum jelly (not supplied)
Procedure
1.
Remove the clips securing the battery cover to the
battery box (
).
Figure 4
1.
Battery cover
2.
Battery clip
8
