Toro 31200, Operator'S Manual, Page: 19 / 68

1. From the M
AIN
M
ENU
, use the center button to
scroll down to the S
ETTINGS
M
ENU
and press the
right button ( Figure 12 ).
g028523
Figure 12
2. In the S
ETTINGS
M
ENU
, use the center button to
scroll down to the P
ROTECTED
M
ENU
and press
the right button ( Figure 13 A).
g028522
Figure 13
3. To enter the PIN code, press the center button
until the correct first digit appears, then press
the right button to move on to the next digit
(
Figure 13 B and Figure 13 C). Repeat this step
until the last digit is entered and press the right
button once more.
4. Press the middle button to enter the PIN code
(
Figure 13 D).
Wait until the red indicator light of the InfoCenter
illuminates.
Note:
If the InfoCenter accepts the PIN code
and the protected menu is unlocked, the word
“PIN” displays in the upper right corner of the
screen.
Note:
Rotate the key switch to the O
FF
position and
then to the O
N
position locks the protected menu.
You have the ability to view and change the settings in
the Protected Menu. Once you access the Protected
Menu, scroll down to Protect Settings option. Use the
right button to change the setting. Setting the Protect
Settings to O
FF
allows you to view and change the
settings in the Protected Menu without entering the
PIN code. Setting the Protect Settings to O
N
hides the
protected options and requires you to enter the PIN
code to change the setting in the Protected Menu.
After you set the PIN code, rotate the key switch O
FF
and back to the O
N
position to enable and save this
feature.
Setting the Auto Idle
•
In the Settings Menu, scroll down to Auto Idle.
•
Press the right button to change the Auto Idle time
between OFF, 8S, 10S, 15S, 20S, and 30S.
19