4
•
If the Rotary Hydraulic Broom begins to vibrate
abnormally, stop immediately. Shut off the traction unit
engine. Repair all damage before commencing
operation.
•
Before servicing or making any adjustments to the
Rotary Hydraulic Broom:
– Stop the traction unit and set the parking brake.
– Shut off the traction unit’s engine and remove key
from ignition.
•
Keep all nuts, bolts and other fasteners tightened
securely. Replace any parts removed during servicing or
adjustments.
•
To assure optimum performance and continued safety of
this product, always use genuine TORO replacement
parts. Replacement parts and accessories made by other
manufacturers may affect the product’s operation,
performance or durability. Such use could also void the
warranty of The Toro Company.
Maintenance
•
Remove the key from the ignition switch to prevent
accidental starting of the engine when servicing,
adjusting, or storing the machine.
•
Perform only those maintenance instructions described
in this manual. If major repairs are ever needed or
assistance is desired, contact an Authorized Toro
Distributor.
•
Be sure that the machine is in safe operating condition
by keeping nuts, bolts, and screws tight. Check all bolts
and nuts frequently to be sure that they are tightened to
specification.
•
Make sure all hydraulic line connectors are tight and all
hydraulic hoses and lines are in good condition before
applying pressure to the system.
•
Keep your body and hands away from pin hole leaks or
nozzles that eject hydraulic fluid under high pressure.
Use paper or cardboard, not your hands, to search for
leaks. Hydraulic fluid escaping under pressure can have
sufficient force to penetrate the skin and cause serious
injury. Seek immediate medical attention if fluid is
injected into skin.
•
Before disconnecting or performing any work on the
hydraulic system, all pressure in the system must be
relieved by stopping the engine and lowering the cutting
units and attachments to the ground.
•
If the engine must be running to perform a maintenance
adjustment, keep hands, feet, clothing, and any parts of
the body away from the cutting units, attachments, and
any moving parts. Keep everyone away.
•
To ensure optimum performance and safety, always
purchase genuine Toro replacement parts and
accessories to keep the machine all Toro.
Never use
“will-fit” replacement parts and accessories made by
other manufacturers.
Look for the Toro logo to ensure
genuineness. Using unapproved replacement parts and
accessories could void the warranty.
Safety and Instruction Decals
Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or lost.
99-6542
Summary of Contents for 30743
Page 15: ...15...
