Toro 30370, Operator'S Manual, Page: 17 / 48

Figure 33
1. Deck frame 3. Clevis pin & self-tapping
screw
2. Vertical tube support
3. Pivot open the floor plate (Figure 34) and secure
with prop rod.
Figure 34
1. Floor plate
4. Loosen the PTO drive shaft bolts and nuts. Remove
the roll pin and pull the drive shaft off of the gearbox
shaft (Figure 35).
Figure 35
1. Drive shaft
3. Bolts
2. Gear box
4. Roll pin
5. Remove the retaining ring securing the rear of the
deck lift cylinder to the pivot pin (Figure 36).
Figure 36
1. Deck lift cylinder 3. Screw
2. Retaining ring 4. Cylinder pin
6. Remove the screw securing the front cylinder pivot
pin to the mower frame (Figure 36). Remove the
cable tie securing the pressure and tank hoses.
7. Remove the front pivot pin and slide the cylinder off
the rear pin Figure 36 Let the cylinder hang out of
the way on the hoses (Figure 37).
17