21
Maintenance Procedure
Maintenance Interval& Service
✝
Initial break in at 10 hours
✓
Initial break in at 50 hours
▲
Initial break in at 200 hours
Inspect engine timing belt (see note below)
Drain and clean the fuel tank
Pack the 2-wheel drive’s rear axle bearings
Check rear wheel toe-in
▲
Change hydraulic oil
▲
Change hydraulic oil filter
▲
Change rear axle oil (4-wheel drive)
Maintenance Schedule
Replace moving hoses
Replace safety switches
Flush the cooling the cooling system and replace fluid
Service the air filter
Change the fuel filter
Inspect the fuel line and connections
✓
Check the engine RPM (idle and full throttle)
Check the rear axle oil level (4-wheel drive)
✝
Torque the wheel lug nuts
✝
Change the engine oil and filter
Inspect cooling system hoses
✝
Check fan and alternator belt tension
Lubricate all grease fittings
Inspect the air filter
Check battery level/cable
connections
Every
400
hours
Every
600
hours
Every
800
hours
Every
200
hours
Every
100
hours
Every 50
hours
Minimum Recommended Maintenance Intervals
Annual Recommendations
Items are recommended every 1500 hours
or 2 years, whichever occurs first.
NOTE: Replace the timing belt after every 1500 hours of operation or if worn, cracked, oil soaked or any
time the belt is removed or loosened.
