Toro 30184 ProLine, Operator'S Manual

Page: 27 / 52

Operation
25
Adjust Caster Position
1. Using the height-of-cut chart, adjust the caster
spacers to match with the axle hole selected
(Fig. 21).
2. Remove clevis pin, slide castor from support and
change spacers(Fig. 21).
3. Install castor in support and insert clevis
pin(Fig. 21).
m–3791
1
3
2
Figure 21
1. Clevis pin
2. 5 mm (3/16”) spacer
3. 13 mm (1/2”) spacer