Assembly
5
Installing the Cutting Deck
1.
Position the cutting deck under the carrier frame.
2.
Mount the cutting deck to the carrier frame with
four (4) clevis pins and hairpin cotters (Fig. 3).
Note:
All four pins must be in the same hole
locations to prevent uneven cutting.
8
11
m-4256
9
10
1
3
5
7
2
4
6
Figure 3
1.
2” (51 mm) Cut Height
2.
2-1/2” (64 mm) Cut Height
3.
3” (76 mm) Cut Height
4.
3-1/2” (89 mm) Cut Height
5.
4” (102 mm) Cut Height
6.
4-1/2” (114 mm) Cut
Height
7.
5” (127 mm) Cut Height
8.
Clevis Pin
9.
Carrier Frame
10. Cutting Deck
11. Hairpin Cotter
Installing the Drive Belt
1.
Remove the deck covers from the cutting unit.
2.
Install the drive belt around the drive pulley on
the traction unit and the upper groove of the
center spindle pulley. The belt must be between
the belt guides (Fig. 4).
3.
Reinstall the deck covers onto the cutting unit.
1
2
3
4
M-4257
Figure 4
1.
Belt Guide (2)
2.
Traction Unit Drive Pulley
3.
Drive Belt
4.
Center Spindle Pulley
