
16
IDENTIFICATION AND ORDERING
MODEL AND SERIAL NUMBERS
The cutting deck has two identification numbers: a
model number and a serial number. The two numbers
are stamped into a plate which is located on carrier
frame behind the right front castor wheel. In any
correspondence concerning the mower, supply the
model and serial numbers to assure that correct
information and replacement parts are obtained.
To order repIacement parts from an authorized TORO
Distributor, supply the foIlowing information:
1.
Model and serial numbers of the machine.
2.
Part number, description and quantity of parts
desired.
Note:
Do not order by reference number if a parts
cataIog is being used; use the part number.
MAINTENANCE CHART
Date
Hours
Used
Lubrication