2. Filling the Engine with Oil
Procedure
Your mower does not come with oil in the engine, but it
does come with a bottle of oil.
1. Remove the dipstick (Figure 4).
Figure 4
2.
Slowly
pour oil into the oil fill tube until the oil level
reaches the
Full
line on the dipstick (Figure 4).
Do
not overfill.
(Max. fill: 20 oz. (0.59 l), type: SAE 30
detergent oil with an API service classification of SF,
SG, SH, SJ, SL, or higher.)
Note:
If you overfill the engine, pour some oil out
of it as directed in Changing the Engine Oil.
3. Install the dipstick securely.
Important:
Change the engine oil after the first
5 operating hours
; change it yearly thereafter.
Refer to Changing the Engine Oil.
Product Overview
Figure 5
1.
Spark plug
6.
Blade control bar
2.
Air filter
7.
Self-propel drive bar
3.
Fuel tank cap
8.
Grass bag
4.
Oil fill/Dipstick
9.
Cutting height levers (4)
5.
Recoil start handle
Figure 6
1.
Rear discharge deflector
5
