Use the fuel-shutoff lever to shut off the fuel when you
are not using the machine for a few days, while you
are transporting the machine to and from the jobsite,
or when the machine is parked inside a building.
Drive-Wheel Release Valves
The 2 drive-wheel release valves are located at the
top of the machine above the transaxles (
).
g282072
Figure 11
Specifications
Height
129.5 cm (51 inches)
Length
173.2 cm (68.6 inches)
Width
90.2 cm (35.5 inches)
RPM (Full Speed)
3800 ± 100 rpm (no load)
Aeration width
61 cm (24 inches)
Coring range
1.3 to 12.7 cm (0.5 to 5 inches)
Holes per square foot
4.6
Tines
36
Weight
388 kg (856 lb)
A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com for a list of all
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
Operation
Before Operation
Before Operation Safety
General Safety
CAUTION
This machine produces sound levels in
excess of 85 dBA at the operator’s ear and
can cause hearing loss through extended
periods of exposure.
Wear hearing protection when operating this
machine.
•
Evaluate the terrain to determine what accessories
and attachments are needed to properly and
safely perform the job. Only use accessories and
attachments approved by Toro.
•
Inspect the area where the equipment is to be
used and remove all rocks, toys, sticks, wires,
bones, and other foreign objects. These can
be thrown or interfere with the operation of the
machine and may cause personal injury to the
operator or bystanders.
•
Mark and avoid hidden objects such as sprinkler
heads, underground wires/cables, invisible fences,
etc. to prevent damage to these systems when
aerating.
•
Wear appropriate personal protective equipment
such as safety glasses, substantial slip-resistant
footwear, and hearing protection. Tie back long
hair and avoid loose clothing and loose jewelry
which may get tangled in moving parts.
•
Check that the operator presence controls,
safety switches, and shields are attached and
functioning properly. Do Not operate unless they
are functioning properly.
•
Do Not operate the machine when people,
especially children, or pets are in the area. Stop
the machine and attachment(s) if anyone enters
the area.
•
Do Not operate the machine with damaged guards,
shields, or covers. Always have safety shields,
guards, switches and other devices in place and
in proper working condition. Frequently check for
worn or deteriorating components and replace
them with the manufacturer’s recommended parts
when necessary.
14
