Toro 23515, Service Manual

Page: 34 / 78

CHASSIS
3-2 Toro 21” Aerator Service Manual
3
Fig. 038 subsystem handles 1
Handle Subsystem – 2014 (Serial 314000001 & up)
(Fig. 038)
A. Handle D. Control - Throttle
B. Tube - Control E. Cable - Drive
C. Tube - Handle, Lift F. Bracket - Trunion
G. Lower Handle Asm J. Handle - Lower
H. Link - Lift K. Rod - Upper Link
I. Ball Joint
Do not overtighten leave 1 or 2 threads showing. Handle must still be able to pivot.
Push angle stop down as far as possible.
With the handle folded, adjust linkage (K) by hand until the ball join on the tine ground engagement lever is
tight against the handle.
Adjust cable so when drive handle (B) is at full speed, there is .03-.10” gap between drive handle #2 and
handle #1
3-4 threads exposed on the front side of the front nut.
Assemble linkage into bottom hole.
Assemble handle into middle position on frame.
1
2
4
5
7
8
9
4
4
1
7
2
A
B
H
D
F
E
J
I
G
C
K
5
9
8