Setup
1
Unfolding the Handle
No Parts Required
Procedure
1.
Raise the handle to the operating position
(
).
g029059
Figure 3
2.
Slide the oval locking rings down each side of
the upper handle and over the lower handle
(
), locking the handle sections together.
2
Checking the Engine-Oil
Level
No Parts Required
Procedure
Refer to
Checking the Engine-Oil Level (page 22)
.
3
Installing the CE
Conversion Kit
Parts needed for this procedure:
1
CE conversion kit (optional kit—sold separately)
Procedure
For machines requiring CE compliance, install the
optional CE conversion kit; refer to the CE conversion
kit installation instructions.
8
Summary of Contents for 23508
Page 35: ......
