Toro 22805, Operator'S Manual

Page: 14 / 16

Declaration of Incorporation
The Toro Company, 8111 Lyndale Avenue South, Bloomington, MN, USA declares that the following unit(s)
conform(s) to the directives listed, when installed in accordance with the accompanying instructions onto certain
Toro models as indicated on the relevant Declarations of Conformity.
Model No. Serial No. Product Description Invoice Description General Description Directive
22805 315000001 and Up Auger Head
AUGER POWER HEAD
ATTACHMENT CE
Auger 2006/42/EC
22806 315000001 and Up Universal Swivel Auger Head
SWIVEL AUGER POWER
HEAD ATTACHMENT CE
Auger 2006/42/EC
Relevant technical documentation has been compiled as required per Part B of Annex VII of 2006/42/EC.
We will undertake to transmit, in response to requests by national authorities, relevant information on this partly
completed machinery. The method of transmission shall be electronic transmittal.
This machinery shall not be put into service until incorporated into approved Toro models as indicated on the
associated Declaration of Conformity and in accordance with all instructions, whereby it can be declared in
conformity with all relevant Directives.
Certified: EU Technical Contact:
Marcel Dutrieux
Manager European Product Integrity
Toro Europe NV
Nijverheidsstraat 5
2260 Oevel
Joe Hager Belgium
Sr. Engineering Manager
8111 Lyndale Ave. South
Tel. +32 16 386 659
Bloomington, MN 55420, USA
February 4, 2015