Specifications
Specifications and design are subject to change
without notice.
Frame
Width
61 cm (24 inches)
Length
10 cm (4 inches)
Height
25 cm (10 inches)
Weight
18 kg (40 lb)
Boom Jib
Width
1.6 cm (0.63 inches)
Length
82.3 cm (32.4 inches)
Height
23.9 cm (9.4 inches)
Weight
10.5 kg (23.2 lb)
Chain
35 links, approximately 76 cm
(2.5 ft), with S-hook ends
Scarifier Tooth (each)
Width (with tip)
5.1 cm (2.0 inches)
Width (without tip)
1.6 cm (0.63 inches)
Length
33 cm (13 inches)
Height
29.7 cm (11.7 inches)
Weight
4.1 kg (9.0 lb)
Tip
Replaceable, cast iron spear
points
Ball hitch (ball not included)
Width
7.6 cm (3.0 inches)
Length
21.3 cm (8.4 inches)
Height
23.9 cm (9.4 inches)
Weight
3.4 kg (7.5 lb)
Ball-mounting hole
Suitable for mounting balls
with 2.5 cm (1 inch) diameter
mounting studs
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
Operation
Installing and Removing
the Attachment
Refer to the
Operator’s Manual
for the traction unit for
the installation and removal procedure.
Important:
Before installing the attachment,
position the machine on a level surface, ensure
that the mount plates are free of any dirt or debris,
and ensure that the pins rotate freely. If the pins
do not rotate freely, grease them.
Note:
Always use the traction unit to lift and move
the attachment.
WARNING
If you do not fully seat the quick-attach
pins through the attachment mount plate,
the attachment could fall off the machine,
crushing you or bystanders.
Ensure that the quick-attach pins are fully
seated in the attachment mount plate.
Using the Boom Jib
Important:
For traction units with wheels, use
the counterweight on the platform while using
the boom jib.
g004044
Figure 5
Use the boom jib to lift and transport various items,
such as balled trees. Secure the item being lifted as
close as possible to the boom jib frame using the
provided lifting chain.
Always use the lifting chain provided to secure items
to the boom jib.
Never lift more than the rated lift capacity of the
traction unit. When transporting a load, keep it as
close to the ground as possible.
6
