Product Overview
G005939
1
2
3
4
5
20
17
6
18
7
8
13
14
15
12
11
21
9
18
16
4
14
19
10
22
Figure 6
1.
Mount plate
7.
Wheel
13.
Control panel
19.
Parking brake lever
2.
Tilt cylinder
8.
Lift cylinder
14.
Lift points
20.
Radiator fill cap
3.
Auxiliary hydraulic couplers
9.
Operator platform
(removable counterweight
not shown)
15.
Handle
21.
Thigh support
4.
Loader arms
10.
Rear access cover (open)
16.
Battery
22.
Flow divider control
5.
Front access cover
11.
Engine
17.
Indicator lights
6.
Fuel tank
12.
Air filter
18.
Tow valves
Controls
Become familiar with all the controls (Figure 7) before
you start the engine and operate the traction unit.
G006057
6
3
1
5
2
4
7
8
Figure 7
1.
Traction control levers
5.
Speed selector lever
2.
Attachment tilt lever
6.
Throttle lever
3.
Loader arm lever
7.
Key switch
4.
Auxiliary hydraulics lever
8.
Hour meter
Key Switch
The key switch, used to start and stop the engine, has
three positions: off, run, and start.
•
To start the engine, rotate the key to the run position,
the glow plug light will come on. When the glow
plug light turns off, turn the key to the start position.
Release the key when engine starts and it will move
automatically to the run position.
•
To stop the engine, rotate the key to the off position.
Throttle Lever
Move the control forward to increase the engine speed
and rearward to decrease speed.
Traction Control Levers
•
To move forward
, move the traction control levers
forward. To move rearward, move the traction
control levers rearward.
•
To go straight
, move both traction control levers
equally.
•
To turn
, move the lever located on the side you
want to turn back toward the neutral position while
keeping the other lever engaged.
14
Summary of Contents for 22337CP
