Removing the Battery
1.
Park the machine on a level surface, engage the parking brake, and lower the loader arms.
2.
Shut off the engine and remove the key.
3.
Remove the battery as shown in
g204573
Figure 51
Charging the Battery
WARNING
Charging the battery produces gasses that can
explode.
Never smoke near the battery and keep sparks and
flames away from battery.
Important:
Always keep the battery fully charged (1.265
specific gravity). This is especially important to prevent
battery damage when the temperature is below 0°C
(32°F).
1.
Remove the battery from the machine; refer to
Removing the Battery (page 36)
.
2.
Charge the battery for 4 to 8 hours at a rate of 3 to 4 A
(
). Do not overcharge the battery.
1
2
3
4
G003792
g003792
Figure 52
1.
Positive battery post
3.
Red (+) charger lead
2.
Negative battery post
4.
Black (-) charger lead
3.
When the battery is fully charged, unplug the charger
from the electrical outlet, then disconnect the charger
leads from the battery posts (
36
Summary of Contents for 22327
