Safety and Instructional Decals
Safety decals and instructions are easily visible to the operator and are located near any area of
potential danger. Replace any decal that is damaged or lost.
Manufacturer's Mark
1.
Indicates the blade is identified as a part from the original
machine manufacturer.
93-6664
1.
Read the
Operator's Manual
for information on greasing the
traction drive every 25 operating hours and greasing the
transmission every 100 operating hours.
98-2006
1.
Fast
4.
Engine—stop
7.
Move the bail up to engage
the cutting blade.
10.
Neutral
2.
Continuous variable setting
5.
Press the primer button 3
times, pull the cord to start
the engine, then move the
throttle to the Fast position.
8.
Move the bail to the handle
to engage the traction drive.
3.
Slow
6.
Release the bail to
disengage the cutting
blade.
9.
Forward speeds
98-4387
1.
Warning—wear hearing protection.
6
