Figure 26
1.
Top of recycle plug lever in switch channel
Bagging the Clippings
Use the grass bag when you want to collect grass and
leaf clippings from the lawn.
If the side discharge chute is on the machine,
remove it and lock the side discharge door (refer to
Removing the Side Discharge Chute (page 17)) before
bagging the clippings.
WARNING
A worn grass bag could allow small stones
and other similar debris to be thrown in the
operator's or bystander's direction and result in
serious personal injury or death to the operator or
bystanders.
Check the grass bag frequently. If it is damaged,
install a new Toro replacement bag.
WARNING
The blade is sharp; contacting the blade can result
in serious personal injury.
Stop the engine and wait for all moving parts to
stop before leaving the operating position.
Installing the Grass Bag
1. Remove the recycle plug (Figure 27).
Figure 27
2. Insert the grass bag handle into the grooves at the
top of the machine.
Important:
A safety switch prevents the
machine from starting unless the recycle plug
is securely installed.
Removing the Grass Bag
1. Lift the grass bag handle out from the grooves at the
top of the machine and remove the bag (Figure 28).
Figure 28
2. Insert the recycle plug (Figure 29).
16
