Figure 6
1. Discharge door handle
2. Plug, rotated clockwise
2. Since the plug is slightly wider than the
discharge tunnel opening, rotate the plug
clockwise slightly while inserting it (Figure 6).
Note:
Ensure that the arrow on the plug
decal points upward.
3. Push the plug all the way in until the spring clip
on the bottom of the plug clicks into place,
locking the plug securely into the discharge
tunnel (Figure 7).
Figure 7
1. Spring clip
4. Release the discharge door handle to lock the
top of the plug.
Step
4
Filling the Crankcase with
Oil
No Parts Required
Procedure
The engine crankcase is shipped without oil.
You must fill it with approximately 30 ounces
(0.88 l) of oil before starting the engine. Refer
to Checking the Engine Oil Level in Operation,
page 12 for oil specifications and instructions.
10
