manualshive.com logo in svg

Toro 22176TE, Operator'S Manual, Page: 2 / 28

Share
Download
Toro 22176TE Operator'S Manual Download Page 2

2

 2004 by The Toro Company

8111 Lyndale Avenue South
Bloomington, MN  55420-1196

Contact us at www.Toro.com

All Rights Reserved

Printed in the USA

Keep this engine Owner’s Manual with your unit.
Should this engine Owner’s Manual become damaged
or illegible, replace  immediately. Replacements may be
ordered through the engine manufacturer.

Contents

Page

Introduction

2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Safety

3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

General Lawn Mower Safety

3

. . . . . . . . . . . . . . . . 

Sound Pressure

5

. . . . . . . . . . . . . . . . . . . . . . . . . . . 

Sound Power

5

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Vibration

5

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Safety and Instruction Decals

6

. . . . . . . . . . . . . . . 

Assembly

7

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Installing the Handle

7

. . . . . . . . . . . . . . . . . . . . . . 

Installing the Starter Rope

7

. . . . . . . . . . . . . . . . . . 

Installing the Fuel Tank and the Fuel Line

7

. . . . . 

Installing the Discharge Tunnel Plug

8

. . . . . . . . . . 

Before Starting

8

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Filling the Crankcase with Oil

8

. . . . . . . . . . . . . . . 

Filling the Fuel Tank with Gasoline

9

. . . . . . . . . . 

Operation

10

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Controls

10

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Starting the Engine

11

. . . . . . . . . . . . . . . . . . . . . . . . 

Stopping the Engine

11

. . . . . . . . . . . . . . . . . . . . . . . 

Operating the Blade and the Self-Propel Drive

11

. . 

Using the Discharge Tunnel Plug

11

. . . . . . . . . . . . 

Adjusting the Cutting Height

12

. . . . . . . . . . . . . . . . 

Using the Grass Bag

12

. . . . . . . . . . . . . . . . . . . . . . . 

Operating Tips

13

. . . . . . . . . . . . . . . . . . . . . . . . . . . 

Maintenance

15

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Recommended Maintenance Schedule

15

. . . . . . . . 

Checking the Engine Oil Level

16

. . . . . . . . . . . . . . 

Cleaning the Underside of the 

Lawn Mower Housing

16

. . . . . . . . . . . . . . . . . . . . 

Cleaning the Discharge Tunnel and Plug

17

. . . . . . 

Servicing the Air Filter

17

. . . . . . . . . . . . . . . . . . . . 

Changing the Engine Oil

18

. . . . . . . . . . . . . . . . . . . 

Maintaining the Cutting Blade

18

. . . . . . . . . . . . . . 

Emptying the Fuel Tank and 

Cleaning the Fuel Filter

19

. . . . . . . . . . . . . . . . . . 

Cleaning under the Belt Cover

20

. . . . . . . . . . . . . . 

Lubricating the Pivot Arms

20

. . . . . . . . . . . . . . . . . 

Adjusting the Self-propel Drive

20

. . . . . . . . . . . . . . 

Servicing the Spark Plug

21

. . . . . . . . . . . . . . . . . . . 

Changing the Oil Filter

21

. . . . . . . . . . . . . . . . . . . . 

Lubricating the Gear Case

22

. . . . . . . . . . . . . . . . . . 

Adjusting the Blade Brake Cable

22

. . . . . . . . . . . . 

Page

Servicing the Wheels

22

. . . . . . . . . . . . . . . . . . . . . . 

Storage

23

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Preparing the Fuel System

23

. . . . . . . . . . . . . . . . . . 

Preparing the Engine

23

. . . . . . . . . . . . . . . . . . . . . . 

General Information

23

. . . . . . . . . . . . . . . . . . . . . . . 

Removing the Lawn Mower from Storage

24

. . . . . 

Accessories

24

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Troubleshooting

24

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Introduction

Read this manual carefully to learn how to operate and
maintain your product properly. The information in this
manual can help you and others avoid injury and product
damage. Although Toro designs and produces safe
products, you are responsible for operating the product
properly and safely.

You may contact Toro directly at www.Toro.com for
product and accessory information, help finding a dealer,
or to register your product.

Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model and
serial numbers of your product ready. Figure 1 illustrates
the location of the model and serial numbers on the
product.

1

Figure 1

1.

Location of the model and serial numbers

Write the product model and serial numbers in the space
below:

Model No.

Serial No.

Summary of Contents for 22176TE





























Reviews:

No comments