Toro 20944, Operator'S Manual

Page: 4 / 20

Setup
Important:
Remove and discard the protective
plastic sheet that covers the engine and any other
plastic or wrapping on the machine.
1
Assembling the Handle
Parts needed for this procedure:
2 Lower handle
4 Short bolt
4 Flat washer
4 Split washer
4 Nut
1 Upper handle
2 Handle knob
2 Curved washer
2 Long bolt
Procedure
1. Attach the lower handle to the mower housing
with the 4 bolts, 4 flat washers, 4 split washers,
and 4 nuts (
Figure 3 ).
g188335
Figure 3
1. Bolt (4) 3. Split washer (4)
2. Flat washer (4) 4. Nut (4)
2. Attach the upper handle to the lower handle
using 2 handle knobs, 2 curved washers, and
2 bolts. Tighten the handle knobs securely by
hand (
Figure 4 ).
g188346
Figure 4
1. Handle knob (2) 4. Upper handle
2. Curved washer (2) 5. Lower handle
3. Bolt (2)
3. Insert the cables into the cable clamp and attach
the cable clip to the handle as shown in
Figure 5 .
g189081
Figure 5
1. Cable clip
4