Toro 145-0057, Installation Instructions

Page: 4 / 4

4
Removing and Installing
the Remaining Motor Mount
Parts needed for this procedure:
1 Motor adapter
1 Motor mount
2 Hex-head bolt (5/16 inch)
2 Nut (5/16 inch)
1 Hex-head bolt (3/8 inch)
1 Nut (3/8 inch)
4 Hex-head bolt (1/4 inch)
4 Nut (1/4 inch)
1 Cylinder spacer
1 Spacer
Procedure
1. Remove and install the remaining motor mount;
refer to the steps listed in
2 Removing an
Existing Motor Mount (page 1) and 3 Installing a
Motor Mount (page 2) .
2. Remove the jack from the engine.
4