Toro 144-0389, Installation Instructions Manual

Page: 3 / 8

3
Installing the Light and
Front Bumper
Parts needed for this procedure:
1 Light
1 Front bumper
2 Hex-washer head screw
Procedure
1. Secure the light to the light bracket using the 2
hex-washer head screws (
Figure 2 ).
g345493
Figure 2
1. Hex-washer head screw 3. Light bracket
2. Light
2. Secure the front bumper using the previously
removed 2 torx-head screws (
Figure 3 ).
g345491
Figure 3
1. Previously removed 2
torx-head screw 2. Front bumper
4
Removing the Right Side
Pod
No Parts Required
Procedure
1. Remove the 4 shoulder screws securing the
right side pod (
Figure 4 ).
Retain the 4 shoulder screws for later installation.
2. Remove the right side pod ( Figure 4 ).
g345495
Figure 4
1. Right side pod 2. Shoulder screw
3