Toro 140-2054, Installation Instructions

Page: 2 / 2

g309690
Figure 3
1. Bolt (1/4 x 5/8 inch) 6. Bolt (1/4 x 1-1/4 inches)
2. Locknut (1/4 inch) 7. Locknut (1/4 inch)
3. Bolt 1/4 x 5/8 inch and
locknut (1/4 inch) 8. Bolt (1/4 x 1 inch)
4. Brace 9. Post
5. Washer (1/4 inch)
9. Loosely secure the tops of the braces and posts
to the rear bow using 4 bolts (1/4 x 5/8 inch) and
locknuts (
Figure 3 ).
10. Install the remaining 2 bolts (1/4 x 1 inch)
through the bottom holes on the braces and
secure them with locknuts (
Figure 3 ).
11. Insert the posts into the receiver brackets.
Note:
Apply wax to the ends of the posts for
ease of insertion and removal.
Important:
Remove the sunshade before
hauling the machine.
12. Tighten all of the fasteners.
13. Secure the rear screen to the rear bow and
posts (
Figure 4 ).
g309691
Figure 4
1. Rear screen
14. Slip the sunshade over the front bow and pull
it back over the rear bow (
Figure 5 ). Angle the
top bow up or down to tighten or loosen the
sunshade.
g309692
Figure 5
1. Sunshade
15. Install the previously removed wheels; torque
the lug nuts to 95 to 122 N∙m (70 to 90 ft-lb).
2