Toro 139-4330, Installation Instructions Manual

Page: 2 / 8

1
Preparing the Machine
No Parts Required
Procedure
1. Park the machine on a level surface.
2. Engage the parking brake.
3. Shut off the engine.
4. Remove the spark-plug wire from the spark plug;
refer to your machine
Operator’s Manual .
2
Removing the Control
Cover
No Parts Required
Procedure
1. Disconnect the wire-harness connector from the
hour meter (
Figure 1 ).
g280735
Figure 1
1. Wire-harness connector 2. Hour meter
2. Remove the control cover by removing the
screws that secure the control cover to the rear
panel (
Figure 2 ).
g280734
Figure 2
1. Screw 2. Control cover
3
Removing the Clutch Bail
No Parts Required
Removing the Handle
1. Remove the screws that secure the panel to the
handle and remove the panel from the handle
(
Figure 3 ).
g287538
Figure 3
1. Handle 3. Panel
2. Screw
2