Form No. 3429-677 Rev B
Traction Lever Kit
Greensmaster
®
1018, 1021 or 1026 Mower
Model No. 139-4330
Installation Instructions
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
1
No parts required
–
Prepare the machine.
2
No parts required
–
Remove the control cover.
3
No parts required
–
Remove the clutch bail.
4
Control-shaft connector
1
Install the control-shaft connector.
Proximity-sensor assembly
1
Flange nut (1/4 inch)
2
5
Double-ended screw
2
Install the proximity-sensor assembly.
6
No parts required
–
Adjust the bail-latch-spacer position.
Wire harness
1
Interlock module
1
7
Screw
2
Install the wire harness and interlock
module.
Lever
1
Knob
1
8
Nut (5/16 inch)
1
Install the lever.
9
No parts required
–
Adjust the traction cable.
10
No parts required
–
Install the control cover.
© 2019—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3429-677* B
