Toro 139-2638, Installation Instructions Manual, Page: 6 / 12

g239269
Figure 6
1. Right pod 3. Battery ground cable
2. Right support bracket 4. Cable
4
Installing the Seat Belt
Parts needed for this procedure:
1 Left seat-belt bracket—Machines without MyRide only
1
Right seat-belt bracket—Machines without MyRide
only
1 Seat-belt assembly
1 Seat-belt buckle
4 Bolt (1/2 x 1-1/4 inches)
4 Locknut (1/2 inch)
2 Self-tapping screw (1/4 x 5/8 inch)
2
Bolt (7/16 x 1-1/4 inches)—Machines with MyRide
only
Machines without MyRide
1. Install the left and right seat-belt brackets using
1 bolt (1/2 x 1-1/4 inches), 1 locknut (1/2 inch),
and 1 self-tapping screw (1/4 x 5/8 inch) for
each bracket ( Figure 7 ). Torque the bolts to 102
N∙m (75 ft-lb).
g222620
Figure 7
1. Locknut (1/2 inch) 3. Self-tapping screw (1/4 x
5/8 inch)
2. Right seat-belt bracket 4. Bolt (1/2 x 1-1/4 inches)
2. Install the seat-belt assembly and buckle to the
brackets using 2 bolts (1/2 x 1-1/4 inches) and 2
locknuts (1/2 inch) as shown in Figure 8 . Torque
the bolts to 102 N∙m (75 ft-lb).
g222621
Figure 8
1. Locknut (1/2 inch) 4. Bolt (1/2 x 1-1/4 inches)
2. Seat-belt buckle 5. Left seat-belt bracket
3. Right seat-belt bracket 6. Seat-belt assembly
6