Toro 136-4360, Installation Instructions, Page: 2 / 4

g204660
Figure 1
1. Bolt—existing hardware 2. Washer—existing
hardware
2. Use 4 bolts (M10 x 30 mm) and 4 spring-coil washers to
secure the rear skid plate to the mount plate (
Figure 2 ).
g204659
Figure 2
1. Bolt (M10 x30 mm) 3. Rear skid plate
2. Spring-coil washer
3. Remove 2 bolts from the axle caps on both sides of the
machine (
Figure 3 ).
g207711
Figure 3
Right Side Shown
1. Bolt 3. Axle
2. Axle cap
4. Use 2 hex-socket screws and 2 lock washers to secure
the outer-rear skid plates to the axle caps on both sides
of the machine (
Figure 4 ).
g204658
Figure 4
Right Side Shown
1. Hex-socket screw 3. Outer-rear skid plate
2. Lock washer 4. Axle cap
2