Installing the Mounting Bracket
1.
Park the machine on a level surface, engage the parking brake, shut off the engine, and remove the key.
2.
Use the 8 flange nuts (3/8 inch) from the sunshade kit and the 4 U-bolts (3-1/2 x 5 inches) to loosely
install the brace brackets to the roll bar (
g213729
Figure 1
1.
Left ROPS-mounting bracket
6.
Brace bracket—from the sunshade kit
2.
Flange nut (3/8 inch)—from the sunshade kit
7.
Locknut (3/4 inch)
3.
U-bolt (3-1/2 x 5 inches)
8.
Washers
4.
Right ROPS-mounting bracket
9.
Bolt (3/4 x 4 inches)
5.
U-bolt (4-1/2 x 3 inches)
3.
Use the 8 flange nuts (3/8 inch) from the sunshade kit and the 4 U-bolts (4-1/2 x 3 inches) to loosely install
the ROPS-mounting brackets to the roll bar (
).
4.
Use the 2 bolts, nuts, and 4 washers included to secure the rollbar in the correct position (
).
5.
Follow the procedure in the installation instruction from the sunshade kit to complete the bracket
installation.
2
