Toro 136-0457, Installation Instructions Manual

Page: 3 / 8

2
Installing the Foam-Marker
Compressor on the Bracket
Parts needed for this procedure:
1 Bracket
4 Bolt (5/16 x 1 inch)
4 Washer (3/8 inch)
4 Nut (5/16 inch)
1 Foam marker (sold separately)
Procedure
Install the foam-marker compressor onto the bracket as
shown in
Figure 1 .
g200499
Figure 1
1. Bolts (5/16 x 1 inch) 3. Nuts (5/16 inch)
2. Washer (3/8 inch)
3
Installing the Compressor and
Bracket on the Machine
Parts needed for this procedure:
1 Carriage bolt
1 U-bolt
3 Flange nuts (3/8 inch)
1 Spacer
1 R-clamp
Procedure
1. Loosen the bolt on the top of the strap and place the
carriage bolt through the strap of the sprayer tank belt
(
Figure 2 ).
g200500
Figure 2
1. Carriage bolt 2. Spacer
2. Slide the spacer onto the bolt and place the bracket
onto the bolt as shown in
Figure 2 .
3. Put the pump suction hose through the R-clamp
(
Figure 3 ).
4. Secure the R-clamp to the bolt with a nut ( Figure 3 ).
3