Toro 136-0372, Installation Instructions Manual

Page: 15 / 64

Figure 24
1. Retainer 4. T-fitting
2. 90° barbed fitting (sprayer
supply hose) 5. Pressure-relief valve
3. Front of the machine
4. Remove the 90° barbed fitting from the T-fitting
(
Figure 24 ).
5. At the top of the of the sprayer tank, remove the
retainer that secures the straight barbed fitting of the
bypass hose to the T-fitting (
Figure 25 ).
Note:
Retain the retainers for installation in Installing
the Bypass Hose—Machines without the Optional
Spray Wand Kit or Electric Hose Reel Kit (page 33)
.
Figure 25
1. Retainer 3. Straight barbed fitting
(bypass hose)
2. T-fitting
6. Remove the straight barbed fitting from the T-fitting
(
Figure 25 ).
Removing the Agitation, Rate, and
Master-Spray Valves from the Machine
1. While supporting the bracket for the agitation, rate,
and master-spray valves, remove the 3 flange-head
bolts (5/16 x 3/4 inch) that secure valve bracket to the
mount (
Figure 26 ).
Figure 26
1. Mount 3. Flange-head bolts (5/16 x
3/4 inch)
2. Bracket
2. Remove the bracket, valves, hoses, and agitation
nozzles from the machine (
Figure 27 ).
Note:
Retain the 3 flange-head bolts (5/16 x 3/4 inch)
for installation in Installing the Agitation, Rate, and
Master-Spray Valve Manifold (page 24) ; you no longer
need the bracket, valves, hoses, and agitation nozzles.
Figure 27
15