Auger Bolt Pin Kit
Power Max
®
Heavy Duty Snowthrower
Model No. 133-2576
Form
No.
3408-329
Rev
C
Installation
Instructions
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
Qty.
Use
Bolt (5/16 x 2-1/2 inches)
2
Spacer
2
Locknut (5/16 inch)
2
Bolt (1/4 x 2 inches)
2
Locknut (1/4 inch)
2
Install the kit.
Installing the Kit
1.
Shut off the engine and secure the machine from movement before you begin to work on it.
2.
Replace bolts, spacers (if applicable), and locknuts as needed; refer to
for the appropriate orientation.
g186563
Figure 1
1.
Locknut (5/16 inch)
3.
Bolt (5/16 x 2-1/2 inches)
5.
Bolt (1/4 x 2 inches)
2.
Spacer
4.
Locknut (1/4 inch)
© 2016—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3408-329* A
Summary of Contents for 133-2576
Page 2: ......
Page 4: ...Notes...
