Form No. 3399-376 Rev A
Alternator Kit
Workman
®
HDX-Auto Utility Vehicle
Model No. 133-0575
Installation Instructions
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals known to the State of California to
cause cancer, birth defects, or reproductive harm.
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
1
No parts required
–
Prepare the machine.
2
No parts required
–
Disconnect the hydraulic pump and
remove the coupler assembly.
3
No parts required
–
Remove the adapter plate.
Alternator pulley
1
Alternator belt
1
4
Hex socket flat head screw (M8 x 20
mm)
2
Install the alternator pulley and belt.
5
No parts required
–
Install the coupler assembly.
6
Alternator-bracket template
1
Drill holes for the alternator bracket.
Alternator bracket
1
Alternator
1
Spacer
1
Hex-head screw (3/8 x 2-3/4 inches)
1
Flat washer (7/16 inch)
1
Flange nut (3/8 inch)
1
Hex-head flange screw (M8 x 20 mm)
1
Hex-head flange screw (1/4 x 3/4 inch)
6
7
Flange nut (1/4 inch)
6
Install the alternator.
8
No parts required
–
Connect the hydraulic pump.
9
Alternator wire harness
1
Connect the kit and engine wire
harnesses to the alternator.
© 2016—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3399-376* A
