Form No. 3396-307 Rev A
Manual Spray Kit
2015 and After Multi-Pro 5800 Turf Sprayer
Model No. 132-5570
Installation Instructions
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
Qty.
Use
Valve module
1
Bolt (1/4 x 5/8 inch)
2
Washer (1/4 inch)
2
Nut (1/4 inch)
2
Install the valve module.
Speedometer
1
Wiring harness
1
Fuse (10 amp)
1
Install the speedometer.
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals known to the State of California to
cause cancer, birth defects, or reproductive harm.
Note:
You may need a Fuse Block Kit (Toro part number
92-2641) to provide power to the speedometer if there are no
open fuse ports. Contact your Toro Distributor to purchase
this kit.
Installing the Valve Module
1.
Position the machine on a level surface, set the parking
brake, turn the ignition off, and remove the key.
CAUTION
If you leave the key in the ignition switch,
someone could accidently start the engine and
seriously injure you or other bystanders.
Remove the key from the ignition switch
before you do any maintenance.
2.
Disconnect the negative battery terminal from the
battery; refer to your
Operator’s Manual
.
3.
Open the hood.
4.
Install the valve module to the front of the storage
compartment using 2 bolts, 2 washers, and 2 nuts
(
Figure 1
1.
Valve module
3.
Washer
2.
Nut
4.
Bolt
© 2015—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3396-307* A
Summary of Contents for 132-5570
Page 4: ......
