2
2. Attach the light bracket to the front of the mower with
the bolts, washers, and nuts removed in step 1 (Fig. 3).
m–6654
1
3
7
4
3
7
6
5
4
2
Figure 3
1.
Light assembly
2.
Mower
3.
Light connector
4.
Bolt
5.
Locknut
6.
Washer
7.
Wire harness
Installing the Switch
1. Remove the plug in the control panel.
2. Install the light switch into the control panel (Fig. 4).
m–6651
2
1
Figure 4
1.
Control panel
2.
Light switch
Installing the Wire Harness
1. Route the wire harness under the foot rest and above the
support rods (Fig. 5).
2. Connect the two head light connectors to the wire
harness (Fig. 3).
3. Install the wire harness clip into the hole in the front of
the machine (Fig. 5)
m–6652
4
2
1
1
3
5
6
Figure 5
1.
Wire harness
2.
Support rods
3.
Mower
4.
Footrest
5.
Harness clip
6.
Hole drilled in front
4. Route the harness along the right side of the footrest
and under the height–of–cut lever (Fig. 6).
5. Install the wire harness clips into the holes in the side of
the frame (Figures 6 and 7).
