Page 1: ...sconnect the wire s from the spark plug s before you do any maintenance Set the wire s aside so that it does not accidentally contact the spark plug s Caution 1 Disconnect the negative battery cable from the battery 2 Remove the left cover plate Fig 1 1 3 2 Figure 1 1 Left cover plate 2 Lockout bracket 3 Rear bolt 3 Remove and discard the rear bolt securing the lockout bracket to the frame Fig 1 S...
Page 2: ...d at the locations indicated in Figure 5 m 5811 3 2 1 4 Figure 5 1 3 1 2 in 8 9 cm 2 10 in 25 4 cm 3 1 in 2 5 cm 4 Drill holes 11 32 in dia 2 Route the wire harness through the tubular light bracket so that the connectors on the harness for the lights are on either end of the bracket Fig 6 m 5810 2 3 3 1 Figure 6 1 Tubular light bracket 2 Wire harness 3 Connectors 3 Install the light bracket to th...
Page 3: ...cable ties as needed Fig 8 8 Connect the orange wire of the harness to the open terminal on the light switch 9 Connect the black wire to the ground bolt on the frame Fig 9 2 1 Figure 9 1 Control panel 2 Ground bolt 10 Connect the harness to the connectors on both lights 11 Install all removed covers and plates 12 Connect the negative battery cable to the battery 13 Turn on the lights 14 Aim the li...
Page 4: ......
