3
Installing the Battery Cover
Fasteners
Replace the existing hand knobs with the provided
fasteners.
1. Loosen and remove the two hand knobs securing
battery cover to battery base (Fig. 1).
1
1
2
3
Figure 1
1.
Hand knobs
2.
Battery
3.
Battery cover
2. Install the two flange bolts (5/16 x 3/4 inch) and two
flange nuts (5/16 inch) in place of the removed hand
knob to secure the battery cover.
Installing the Pump Shroud
Install the pump shroud to cover the pump drive.
1. Loosen the two pump bolts in the pump face and install
the shroud support as shown in figure 2.
1
2
3
4
5
6
m–6949
Figure 2
1.
Shroud support
2.
Pump bolt (9 x 10 mm)
3.
Spring lock washer
4.
Flange bolt
(1/4 x 1/2 inch)
5.
Flange nut (1/4 inch)
6.
Shroud
2. Tighten bolts to secure the shroud support.
3. Assemble the shroud as shown in figure 2 using the four
flange bolts (1/4 x 1/2 inch) and four flange nuts
(1/4 inch).
