11
7
Step
Parts needed for this step:
•
1 Idler pulley assembly with bracket
•
5 Bolts, 5/16 x 7/8 inch
•
5 Flange nuts, 5/16 inch
•
1 Spring bracket
•
1 Skid plate
•
1 Shoulder bolt, 3/8 x 2–1/2 inch
•
1 Flange nut, 3/8 inch
•
1 Spring
Installing the Bagger Idler
Pulley and the Skid Plate
1. Install the spring bracket to the rear bumper with 2
bolts (5/16 x 7/8 inch) and 2 flange nuts (5/16 inch)
(Fig. 11).
1
2
4
3
Figure 11
1.
Spring bracket
2.
Rear bumper
3.
Bolt, 5/16 x 7/8 inch
4.
Flange nut, 5/16 inch
2. Install the skid plate and idler pulley bracket to the rear
bumper with 3 bolts (5/16 x 7/8 inch) and 3 flange nuts
(5/16 inch) (Fig. 12).
3. Install the skid plate to the bottom of the rear bumper
with 2 bolts (5/16 x 7/8 inch) and 2 flange nuts
(5/16 inch) (Fig. 12).
2
1
4
5
3
Figure 12
1.
Skid plate
2.
Idler pulley bracket
3.
Rear bumper
4.
Bolt, 5/16 x 7/8 inch
5.
Flange nut, 5/16 inch
4. Install the shoulder bolt (3/8 x 2–1/2 inch), spring and
flange nut (3/8 inch) to the spring bracket (Fig. 13).
2
3
1
4
Figure 13
1.
Spring bracket
2.
Shoulder bolt, 3/8 x
2–1/2 inch
3.
Flange nut, 3/8 inch
4.
Spring
Summary of Contents for 100 Series Z Master
Page 28: ...28 ...