Toro 09960, Operator'S Manual, Page: 67 / 92

3. Lift the belt cover from the machine ( Figure 142 ).
g340154
Figure 142
Installing the Belt Cover
1. Align the mount bracket of the belt cover with
the cover-support bracket of the machine frame
(
Figure 143 ).
g340148
Figure 143
1. Mount bracket (belt cover) 2. Cover-support bracket
(machine frame)
2. Lower the belt cover ( Figure 144 ).
g340174
Figure 144
3. Fully lower the latch handle to secure the cover
(
Figure 145 ).
g340173
Figure 145
1. Belt cover 2. Latch handle
4. If your machine has the CE belt-cover latch
lanyard, thread the lanyard bolt into the hole in
the cover latch, and tighten the bolt (
Figure 146 ).
67