Toro 08839, Operator'S Manual

Page: 55 / 64

Electrical System
Maintenance
Replacing the Fuses
1. Prepare the machine for maintenance; refer to
Preparing for Maintenance (page 44) .
2. Lower the operator’s cushion; refer to Lowering
the Operator’s Cushion (page 46) .
3. Remove the open fuse from the fuse block
(
Figure 80 ).
g385715
Figure 86
1. Fuse block
4. Insert a new fuse of the same amperage into
the fuse-block slot.
5. Raise and secure the operator’s cushion; refer
to
Raising the Operator’s Cushion (page 46) .
55