Grooming Reel Mechanical Problems
Problem
Possible Causes
Correction
Groomer not engaged.
Groomer drive gears are worn
or damaged.
Inspect groomer drive
assembly and replace
damaged drive components.
The groomer is set too
aggressively.
Refer to groomer Installation
Instructions for groomer set-up
information.
The grooming reel blades are
bent, damaged or missing.
Repair or replace blades if
necessary.
The grooming reel shaft is
bent or damaged.
Replace grooming reel shaft.
The turf is damaged or has
uneven grooming.
Grooming depth is not equal
on both ends of grooming reel.
Adjust depth if necessary.
Check and adjust cutting unit
set up (level bed knife to reel,
set height-of-cut, etc.).
Greensmaster
®
eFlex 1021
Page 3–13
Troubleshooting: Grooming Reel Mechanical Problems
20248SL Rev C
Summary of Contents for 04861
