Product Overview
Specifications
Tractors
These dethatching units will mount on the Greensmaster 3300 and 3400 Traction Units.
Height-of-cut
Dethatching depth is adjusted on the front roller by two vertical screws and held by two
locking capscrews
Height-of-cut Range
Bench HOC range is 4.78 mm (0.188 inch) below ground level to 6.35 mm (0.250 inch)
above ground level.
Reel Bearings
Two sealed stainless steel, deep groove ball bearings.
Rollers
The rear roller is a 5.1 cm (2 inch) diameter steel full roller.
Grass Shield
Non-adjustable shield with adjustable cut-off bar to improve grass discharge from reel in
wet conditions.
Counterweight
A cast iron weight mounted opposite to the drive motor balances the dethatching unit.
Net Weight
33 kg (73 lb)
Attachments/Accessories
A selection of Toro approved attachments and accessories is
available for use with the machine to enhance and expand
its capabilities. Contact your Authorized Service Dealer or
Distributor or go to www.Toro.com for a list of all approved
attachments and accessories.
Operation
Note:
Determine the left and right sides of the machine
from the normal operating position.
7
Summary of Contents for 04720
Page 9: ...Notes 9...
