110-2304
Narrow Wiehle
Flex 18
2.5 inches (63.5 mm)
Aluminum
Standard Front
110-2305
Wide Wiehle
Flex 18
2.5 inches (63.5 mm)
Aluminum
More Penetration
110-2306
Full Roller
Flex 18
2.5 (63.5 mm) inches Steel
Least Penetration
110-2303
Rear Roller
Flex 18
2.0 inches (50.8 mm)
Aluminum
Standard Rear
Use the following table and Figure 12 to set the rate of clip.
Clip
(Refer to Figure 12 for pulley locations.)
Drive pulley number
of teeth
Driven pulley number
of teeth
14 Blade Clip inch (mm) 11 Blade Clip inch (mm)
8 Blade Clip inch (mm)
27 (standard)
22 (standard)
0.112 (2.9)
0.143 (3.6)
0.197 (5.0)
22
22
0.138 (3.5)
0.176 (4.5)
0.241 (6.1)
22
27
0.172 (4.4)
0.219 (5.6)
0.301 (7.7)
The reel is shipped with one 27 tooth and one 22 tooth pulley. To get a .16 inch (4 mm) clip, you must purchase
a 22 tooth pulley. The clip can only be changed on the reel drive (Figure 12). Do not change the drive ratio
on the gearbox pulleys.
Figure 12
1.
Reel drive belt
3.
Driven pulley
2.
Drive pulley
8
