Height of cut
1/16 to 19/64
inches (1.5 to 7.5
mm) with Micro-Cut
bedknife
1/16 to 19/64
inches (1.5 to 7.5
mm) with Micro-Cut
bedknife
Clip frequency
11 blade
(standard): .14
in.
11 blade
(standard): .14
inch
Attachments/Accessories
A selection of Toro approved attachments and
accessories are available for use with the machine to
enhance and expand its capabilities. Contact your
Authorized Service Dealer or Distributor or go to
www.Toro.com for a list of all approved attachments
and accessories.
Operation
Note:
Determine the left and right sides of the
machine from the normal operating position.
Think Safety First
Please carefully read all of the safety instructions and
decals in the safety section. Knowing this information
could help you or bystanders avoid injury.
Checking the Engine Oil Level
Check the engine oil level before each use or every 8
operating hours, refer to Checking the Engine Oil Level
in Engine Maintenance , page 22.
Filling the Fuel Tank
Important:
Never use methanol, gasoline
containing methanol, gasohol containing more
than 10% ethanol, gasoline additives, premium
gasoline, or white gas because the fuel system
could be damaged. Do not mix oil with gasoline.
Figure 17
1.
Fuel tank cap
2.
Fuel gauge
Gasoline is harmful or fatal if swallowed.
Long-term exposure to vapors can cause serious
injury and illness.
•
Avoid prolonged breathing of vapors.
•
Keep face away from nozzle and gas tank or
conditioner opening.
•
Keep gas away from eyes and skin.
16
Summary of Contents for 04018 Greensmaster Flex 18
Page 9: ...104 2621 1 Read the Operator s Manual 9 ...
Page 39: ......
