Specifications
Note:
Specifications and design are subject to
change without notice.
Traction Unit Specifications
Width of cut, 27-inch cutting
units
307 cm (121 inches)
Width of cut, 32-inch cutting
units
320 cm (126 inches)
Overall width, 27-inch cutting
units down
345 cm (136 inches)
Overall width, 32-inch cutting
units down
358 cm (141 inches)
Overall width, cutting units up
(transport)
239 cm (94 inches)
Overall length
370 cm (146 inches)
Height with ROPS
220 cm (87 inches)
Track width, front
229 cm (90 inches)
Track width, rear
141 cm (55.5 inches)
Wheelbase
171 cm (67.5 inches)
Net weight (with no cutting
units and no fluids)
1574 kg (3,470 lb)
Attachments/Accessories
A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to
www.Toro.com
for a list of all
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
Operation
Note:
Determine the left and right sides of the
machine from the normal operating position.
Before Operation
Before Operation Safety
General Safety
•
Never allow children or untrained people to
operate or service the machine. Local regulations
may restrict the age of the operator. The owner
is responsible for training all operators and
mechanics.
•
Become familiar with the safe operation of the
equipment, operator controls, and safety signs.
•
Before you leave the operator’s position, do the
following:
– Park the machine on a level surface.
– Disengage and lower the cutting units.
– Engage the parking brake.
– Shut off the engine and remove the key.
– Wait for all movement to stop.
– Allow the machine to cool before adjusting,
servicing, cleaning, or storing it.
•
Know how to stop the machine and shut off the
engine quickly.
•
Do not operate the machine without all guards
and other safety protective devices in place and
functioning properly on the machine.
•
Before mowing, always inspect the machine to
ensure that the cutting units are in good working
condition.
•
Inspect the area where you will use the machine
and remove all objects that the machine could
throw.
Fuel Safety
•
Use extreme care in handling fuel. It is flammable
and its vapors are explosive.
•
Extinguish all cigarettes, cigars, pipes, and other
sources of ignition.
•
Use only an approved fuel container.
•
Do not remove the fuel cap or fill the fuel tank
while the engine is running or hot.
•
Do not add or drain fuel in an enclosed space.
25
