Toro 03781, Operator'S Manual

Page: 23 / 76

Diagnostics
Menu Item Description
Cutting Units Indicates the inputs, qualifiers,
and outputs for raising and
lowering the cutting units
Hi/Low Range Indicates the inputs, qualifiers,
and outputs for driving in
transport mode
PTO Indicates the inputs, qualifiers,
and outputs for enabling the
PTO circuit
Engine Run Indicates the inputs, qualifiers,
and outputs for starting the
engine
Backlap Indicates the inputs, qualifiers,
and outputs for operating the
backlap function
Settings
Menu Item Description
Units Controls the units used on the
InfoCenter (English or Metric)
Language Controls the language used
on the InfoCenter*
LCD Backlight Controls the brightness of the
LCD display
LCD Contrast Controls the contrast of the
LCD display
Front Backlap Reel Speed Controls the speed of the front
reels in backlap mode
Rear Backlap Reel Speed Controls the speed of the rear
reels in backlap mode
Protected Menus Allows a person authorized
by your company with the
PIN code to access protected
menus
Auto Idle
Controls the amount of time
allowed before returning the
engine to low idle when the
machine is stationary
Blade Count
Controls the number of blades
on the reel for reel speed
Mow Speed
Controls the ground speed for
determining the reel speed
Height of cut (HOC)
Controls the height of cut
(HOC) for determining the reel
speed
F Reel RPM
Displays the calculated reel
speed position for the front
reels. The reels can also be
manually adjusted
R Reel RPM
Displays the calculated reel
speed position for the rear
reels. The reels can also be
manually adjusted
*Only "operator-faced" text is translated. Faults,
Service, and Diagnostics screens are "service-faced.".
Titles will be in the selected language, but menu items
are in English.
Protected under Protected Menus—accessible only
by entering PIN
About
Menu Item Description
Model Lists the model number of the
machine
SN Lists the serial number of the
machine
Machine Controller Revision Lists the software revision of
the master controller
InfoCenter Revision Lists the software revision of
the InfoCenter
CAN Bus Lists the machine
communication bus status
Protected Menus
There are 5 operating configuration settings that are
adjustable within the Settings Menu of the InfoCenter:
Blade Count, Mow Speed, Height of Cut (HOC), F
Reel RPM, and R Reel RPM. You can lock these
settings by using the Protected Menu.
Note:
At the time of delivery, the initial password
code is programmed by your distributor.
Accessing Protected Menus
Note:
The factory default PIN code for you machine
is either 0000 or 1234.
If you changed the PIN code and forgot the code,
contact your authorized Toro distributor for assistance.
1. From the M
AIN
M
ENU
, use the center button to
scroll down to the S
ETTINGS
M
ENU
and press the
right button ( Figure 40 ).
g028523
Figure 40
2. In the S
ETTINGS
M
ENU
, use the center button to
scroll down to the P
ROTECTED
M
ENU
and press
the right button ( Figure 41 A).
23