Separating the Generator
Cooling-Air Shrouds
1.
Remove the 4 flange-head capscrews and 4
flange locknuts that secure the upper and lower
generator cooling-air shrouds (
).
g378913
Figure 66
1.
Flange-head capscrew
3.
Flange locknut
2.
Upper generator
cooling-air shroud
4.
Lower generator
cooling-air shroud
2.
Separate the shrouds.
3.
Lift the upper shroud to access the grease
fittings of the driveshaft.
Assembling the Generator
Cooling-Air Shrouds
1.
Align the grooves in the top and bottom generator
cooling-air shrouds with the driveshaft-brush
seal and the flange of the generator cover
(
).
g378915
Figure 67
1.
Upper generator
cooling-air shroud
3.
Flange (generator cover)
2.
Driveshaft-brush seal
4.
Lower generator
cooling-air shroud
2.
Align the holes in the generator cooling-air
shrouds with the compression-limiting pins.
3.
Secure the halves of the generator cooling-air
shrouds and compression-limiting pins with the
4 flange-head capscrews and 4 flange locknuts
(
).
45
