Toro 03673 Reelmaster 5410-G, Operator'S Manual

Page: 44 / 48

WARNING
Hydraulic fluid escaping under pressure can
penetrate skin and cause injury.
• Make sure all hydraulic fluid hoses and lines are
in good condition and all hydraulic connections
and fittings are tight before applying pressure to
the hydraulic system.
• Keep your body and hands away from pin
hole leaks or nozzles that eject high pressure
hydraulic fluid.
• Use cardboard or paper to find hydraulic leaks.
• Safely relieve all pressure in the hydraulic system
before performing any work on the hydraulic
system.
• Get immediate medical help if fluid is injected
into skin.
Using the Hydraulic System
Test Ports
Use the hydraulic system test ports to test the pressure in
the hydraulic circuits. Contact your local Toro distributor for
assistance.
Use the test ports on the front hydraulic tubes ( Figure 67 ) to
assist in troubleshooting the traction circuit.
Figure 67
1. Traction circuit test port
Use the test ports on the mow manifold block ( Figure 68 ) to
assist in troubleshooting the mow circuit.
1
g021221
1
Figure 68
1. Mow circuit test ports (2)
Use the test port on the lift manifold block ( Figure 69 ) to
assist in troubleshooting the lift circuit.
Figure 69
1. Lift circuit test port
44